Powder coating for builders, fabricators and trades.
Architectural aluminium, fabrication runs and batch work, prepared, sprayed and oven cured under one roof in Elizabeth South.
- 2000 Founded in Elizabeth South
- 20+ Years of experience
- 100s Projects completed
- Mild steel
- Galvanised steel
- Electroplated steel
- Aluminium
- Stainless steel
- Steel alloys
- Gates and fencing
- Fabrication
- Wheels and parts
- Garden statues
What comes through the roller door.
Builders, fabricators and trades bring us most of our work: architectural sections, fabrication runs and batch jobs. Anything that holds an electrostatic charge and can take the heat of the oven can be powder coated.
-
Architectural aluminium Extrusion, architectural sections, window frames and trim, batch coated for trades and builders. AluminiumRAL -
Fabrication runs From single brackets to full fabrication runs, in safety yellow, signal red or anything on the chart. Batch workFluros -
Gates, fencing and balustrades Mild steel gates, frames, brackets and fencing, coated in Colourbond shades so they match the house. Mild steelColourbond -
Wheels and parts Alloy wheels and car parts, stripped back and coated in the colour you pick, from gloss black to candy red. GlossSatinCandy -
Garden statues and the awkward ones The jobs people assume cannot be coated usually can. Bring the awkward one in and we will tell you straight. SpecialtyAnti-graffiti
Welcome to OZ Coat Powdercoaters
We coat almost anything metal.
Here at OZ Coat we provide a premium service and can coat almost anything metal, from mild steel and galvanised and electroplated steel through to aluminium, stainless steel and most other steel alloys. Even garden statues can be powder coated.
With a world of colours to select from, including fluros and neons, Colourbond, RAL, chromes, anti-graffiti, gloss, satin and matte, you have endless options. Most of all, you are in good hands.
Know more
From bare metal to a cured film, under one roof.
Preparation, colour matching, electrostatic application and oven curing all happen under one roof in Elizabeth South, so nothing is handed off and nothing gets lost between trades.
-
Preparation
The finish is won
before the powderEvery surface has to be clear of impurities before anything is sprayed. Depending on the item that means sanding, cleaning or abrasive blasting. The success of the whole process rests on this step.
-
Electrostatic spray
A dry powder,
electrically chargedA solvent free dry mix of plastic resins, pigment and fillers is given an electrostatic charge and sprayed onto the surface of the item. The charge is what makes the powder wrap and hold evenly.
-
Oven cure
Heat turns powder
into a coatingThe item goes into a hot oven, which causes a chemical reaction. The powder melts and flows out into a single continuous film. This is the moment loose powder becomes a beautiful finish.
-
The finish
Durable, smooth,
built to lastIn a basic sense, the process ensures the most durable, smooth finish available. It is why powder coating outlives wet paint on gates, fabrication, wheels, furniture and architectural metalwork.
A world of colours to select from.
Colour is only half of it. The system, the finish and the metal underneath all change how a coating wears, so we work the options through with you before anything is sprayed.
Standard architectural ranges through to chromes and candy colours, matched to the system your job or specification calls for.
- Colourbond The Australian architectural standard #4a5257
- RAL European reference colours by number #c80000
- Chromes Mirror bright metallic coatings #c9cdd0
- Candy colours Deep translucent colour over a bright base #7a0016
Gloss level changes how a surface reads and how well it hides marks. We will tell you which one suits the item rather than which one sells.
- Gloss Full reflection, easiest to wipe down #16171a
- Satin Soft sheen, the everyday middle ground #4f5358
- Matte Flat and modern, no hot spots #7d8186
- Textured Fine grain that hides handling marks #a9aeb2
Anything that holds an electrostatic charge and can take oven heat can be powder coated, which covers most metal that comes through the door.
- Mild steel Fabrication, gates, frames, brackets #41474c
- Galvanised and electroplated Coated over the top of existing plating #8d959b
- Aluminium Extrusion, architectural sections, wheels #bfc5c9
- Stainless and other alloys Most other steel alloys are no trouble #6b7379
The jobs people assume cannot be coated usually can. Bring the awkward one in and we will tell you straight whether it will work.
- Anti-graffiti Surfaces that clean back instead of staining #25415a
- Fluros and neons High visibility colour that stays bright #ff5c00
- Garden statues Yes, garden statues can be powder coated #3f5c47
- Fabrication and architectural Batch work for trades and builders #2c3033
Our promise
We guarantee our work and our services. We will get it right the first time, putting a smile on a customer face as they see the final result.
- Founded
- 2000
- Founded
- Years of experience
- 20+
- Years of experience
- Projects completed
- 100s
- Projects completed
Bare metal in. Any colour out.
Premium powder coating in Elizabeth South since 2000. Steel, aluminium, stainless, and a world of colours to select from.
Get a quoteDrag across the wheel to coat it Signal red #C80000
Questions people ask before they bring a job in.
What is powder coating?
Powder coating is a dry finishing process. A solvent free dry mix of plastic resins, pigment and fillers is electrostatically charged, sprayed onto an item, then cured in a hot oven. The heat causes a chemical reaction that melts the powder into one continuous, durable, smooth film.
What can be powder coated?
Any object that holds an electrostatic charge and can withstand the heat of the oven can be powder coated. In practice that covers mild steel, galvanised and electroplated steel, aluminium, stainless steel and most other steel alloys. Garden statues can be powder coated too.
Why does preparation matter so much?
The success of the process relies on the prep work. All surfaces need to be clear of any impurities in order to create the best possible outcome. Preparation could include sanding, cleaning or abrasive blasting depending on the item.
What colours and finishes are available?
There is a world of colours to select from, including fluros and neons, Colourbond, RAL, chromes, anti-graffiti, gloss, satin and matte. Textured finishes and candy colours are available as well.
Where is OZ Coat Powdercoaters located?
OZ Coat Powdercoaters is at 12 Wiley St, Elizabeth South SA 5112, in the northern suburbs of Adelaide. You can call the shop on (08) 8252 6666 or email admin@ozcoatsa.com.au.
How long has OZ Coat been powder coating?
OZ Coat Powder Coating was founded in 2000 and has been offering a comprehensive powder coating service in the north of South Australia ever since, with over 20 years of experience behind the team.
Tell us what needs coating.
Send through the item, the colour you have in mind and roughly when you need it back. Someone from the shop will come back to you by email.